Joyor S10-S-Z · Tyres & wheels

Wheel wobbles or bumps once per turn

A wobble you feel at every turn of the wheel is usually a tyre not sitting evenly on the rim.

Difficulty: MediumTime: 20–40 minutes3 things you need

Is this your problem?

  • A thump or wobble that speeds up as you go faster
  • The tyre looks egg-shaped when spun

Likely causes

1
Tyre bead not seatedHow to tell: The line on the tyre is closer to the rim on one part than another.
2
Tube twisted inside the tyreHow to tell: Happens after a repair.
3
Loose axle nutsHow to tell: The wheel moves side to side when you rock it.
4
Bent brake discHow to tell: A rubbing sound once per turn, not a bump. See the brake rub guide.
Check this first

Lift the wheel, spin it slowly and watch the line just above the rim. Then rock the wheel side to side.

What you need

Tools

Example photo: Pump with a pressure gaugeExample photo
Pump with a pressure gauge

A floor pump with a gauge. Scooters like this one normally have a car-style (Schrader) valve: check yours and make sure the pump head fits it.

Photo: Ewok Slayer, Public domain, resized
Example photo: Spray bottle with soapy waterExample photo
Spray bottle with soapy water

Water with a squirt of washing-up liquid. Bubbles show exactly where air escapes.

Photo: Kaviyadharshini Selvakumar, CC BY-SA 4.0, resized
Example photo: Spanners (combination wrenches)Example photo
Spanners (combination wrenches)

Metric. The axle nuts on 10-inch scooters are usually big (often 18 mm or more): measure yours before buying.

Photo: Fructibus, CC0, resized

Photos show the kind of tool or part, not a specific product. We don’t sell anything and get nothing from any shop.

Step by step

Tap a step when it’s done to keep your place.

  1. Check the axle nuts

    If the wheel rocks, tighten both axle nuts firmly. Loose axle nuts are dangerous: fix this before anything else.

  2. Let most of the air out

    Leave just enough to keep shape.

  3. Make the bead slippery

    Spray soapy water where the tyre meets the rim, both sides.

  4. Pump up slowly while watching the line

    Push down on the low spots of the tyre as you pump. It often pops into place. Stop at the sidewall maximum.

  5. Spin and check again

    The line should be the same height all round. If not, repeat. If it still wobbles, the tyre may be damaged.

Stay safe

  • Do not ride with a wobble at speed.

When to take it to a shop

If the tyre or rim is bent, or the wobble stays after reseating.

Also check

Written for the Joyor S10-S-Z using the maker’s published specs and error list (Joyor technical guide) plus general repair practice for scooters built this way. Parts and fittings can change between production batches: if yours looks different, trust your scooter and its manual. Repairs are at your own risk.

Found a mistake? Tell us.